Cadillac Tuning

Hennessey Powers-Up Cadillac Escalade beyond Recognition

When a giant in the tuning industry like Hennessey meets the almighty Cadillac Escalade then be definitely sure that hell will break loose, the result being no other than an outstanding and outrageous tuning project.

The aftermarket specialists have recently carried out an impressive power upgrade to this Cadillac Escalade seen in the video below, the model now packing a whopping 842 horsepower, and delivering a sprint from 0 to 100 km/h in just 3.9 seconds.

This is at least what the engineers claim, and I personally believe them, since this wouldn’t be the first time they would deliver as promised.

We are not going to spoil all the fun and let you enjoy the video with the Cadillac Escalade`s new power put together by Hennessey. Also, please find below the full details of their project, released by motorward1 auto online magazine.

Hennessey Cadillac Escalade HPE800 Details:

Power:

842 bhp @ 6,500 rpm
855 lb-ft torque @ 4,000 rpm

Performance:

0-60 mph: 3.9 sec.
1/4 mile: 12.3 sec. @ 112 mph

Main Highlights:

High-flow 2.9L supercharger system running 10 psi boost pressure.
High-flow air to water intercooler system.
Custom forged aluminum pistons with 10.0:1 compression ratio.
416 CID stroker motor
Forged steel wrist pins.
6.125-inch Billet steel H-beam connecting rods with ARP bolts.
Balance, blueprint & assemble shortblock: fully de-bur block, line hone block with ARP main studs, deck block.
Bore block on 3-axis CNC mill, hone block with torque plates, balance crankshaft, check bearing clearances.
Assemble shortblock.
High-flow intake manifold.
CNC Ported Cylinder Heads ports- Competition valve job, extensive flow testing, chambers milled to desired cc.
Lightweight hollow stem intake valves, exhaust valves.
Extreme duty dual valve springs.
Titanium retainers, machined locators & locks, GM valve seals.
Chamber volumes measures & adjusted for compression.
CNC work hand blended into valve job, spring pressures measured & adjusted.
HPE hydraulic roller camshaft upgrade.
Hydraulic lifter upgrade.
Extreme duty pushrod upgrade.
1.75 inch stainless steel long-tube headers.
Stainless steel mid-pipe exhaust upgrade.
HPE engine management upgrade & chassis dyno calibration.
Professional installation and all necessary gaskets & fluids.
Chassis dyno testing. You’ll receive a before & after dyno graph report showing power and torque measured at the rear wheels.
Road testing (up to 200 miles).
Hennessey exterior badge (rear).
HPE800 Powered by Hennessey badges (side & rear).
Hennessey serial numbered plaque signed by John Hennessey (interior).
Hennessey serial numbered plaque signed by the HPE technician (engine bay).
Powered by Hennessey premium floor mats.
Serial numbered Certificate of Authenticity personally signed by John Hennessey.
Shell V-Power 93 octane gasoline.
Pennzoil Ultra Platinum synthetic oil & filter change.

SHARE THE ARTICLE

Pin It

Leave a Reply

Your email address will not be published. Required fields are marked *

*